background image

Specifications

8

Brand Name
Model

Central Illumination (Illumination 
range at 

φ

75 mm (3inch))

Color Temperature
Illumination Adjustment
Illumination range
LED Used
LED Life
Rated Power Consumption
Rated Voltage
Weight 
Outer Dimensions
Standard Head Circumference
Photobiological safety
FDA Listing No. (Product Code)
MET Classified No.
Notification No. in Japan

Wearable Surgical Lighting System OPELA

-H (High Illumination Model)

145,000 Lux 

±

10% (Illumination distance: 400 mm(16inch))

4,500K 

±

10%

Yes (5 to 100%)
Variable (

φ

75 -125 mm, 

φ

3 - 5 inch) (Illumination distance: 400 mm(16inch))

Power LED x 3
50,000 Hours and Over
Approx. 7.2 W
9V
Approx. 390 g 

±

10% (Excluding Cable)

Approx. W160 x H170 x D300 to 350 mm 

±

10% (W6.3 x H6.7 x D11.8

13.8 inch 

±

10%) (Depth can be changed by size adjustment)

53 to 66 cm (21 to 26 inch)
Retinal blue light hazard (LB) : Risk Group 1 / Others : Exempt
D338313 (HPP, Class1), D360523 (FQP, Class2), D360534 (FSQ, Class2)
E300019
13B3X10231000001

Built-In Rechargeable Battery

Continuous Lighting Hours

Rated Input
Rated Output
Electric Capacity
Weight
Outer Dimensions

Nickel Hydride Secondary Battery
Dimmer Knob MAX (Dimming Level 100%) : Approx. 2.5 Hours
Dimmer Knob # 7 (Dimming Level 70%)     : Approx. 3.5 Hours
Dimmer Knob # 5 (Dimming Level 50%)     : Approx. 6 Hours
12V        2.5A
9V        0.8A
4,500 mAh
Approx. 480 g 

±

10% (Excluding Dedicated AC Adapter)

Approx. W140 x H100 x D50 mm 

±

10% (W5.5 x H3.9 x D2 inch 

±

10%)

Manufacturer
Model Number
Rated Input
Rated Output

SINPRO ELECTRONICS CO., LTD.
MPU32B-105
100 - 240V      47 - 63 Hz  0.6 - 0.4A
12V      2.5A max

*Specifications change depending on the usage conditions and are subject to change without notice.
*Using, charging, or storing the product at a temperature or humidity outside of environmental specifications   

will reduce the battery capacity and charging efficiency and cause the lighting time to become shorter.

Main Body

Battery Unit

Dedicated AC Adapter

Manufacturer
Model Number
Weight
Material
Pelvis diameter
Country of Origin

Mizuno Corporation
C3JKB501
103g (M-L), 111g (LL)
Nylon (90%), Polyester (10%)
75 - 95 cm  (30 to 37 inch) (M-L), 95-115 cm (37 to 45 inch) (LL)
Japan

Attached belt

Electrical Shock Protection Classification
Protection Against Harmful Intrusion of Water or Particulates
Sterilization
Use in High Oxygen Concentration Environments
Operation Mode

Internally Powered Equipment
Unintentional
Unintentional
Unintentional
Continuous Operation

Instrument Classification

When Charged
When Used
In Storage
Atmospheric Pressure Allowance

15 to 25

°

C (59 to 77

°

F), 20 to 85% RH (Non-Condensing)

15 to 32

°

C (59 to 89.6

°

F), 20 to 85% RH (Non-Condensing)

-40 to 60

°

C (-40 to 140

°

F) (within 4 hours), -20 to 40

°

C (-4 to 104

°

F) (over 4 hours), 20 to 85% RH (Non-Condensing)

700 to 1,060 hPa

Environmental Specifications

Manufacturer
Model Number

HAKUBA Photo Industry Co., Ltd.
SP-BS-SBLBK

Storage bag

Manufacturer
Model Number

PELICAN USA (Case) / Emic.Ltd (Cushion)
1507 Air

Hard case

(Reference Value at Full Charge)

Do not use accessories other than those specified by us.

Using accessories other than those specified by us may result the product to increase 

electromagnetic emissions or reduce electromagnetic immunity.

Do not use the product near other devices.

If use near other devices is necessary, check that the product and other devices operate correctly.

WARNING

Conformity information

• This product satisfies the requirements of CISPR11:2009 + A1:2010  Group 1, Class B.
• This product has been tested for immunity against level 4 electrostatic discharge (contact 

discharge: 8 kV, air discharge:15 kV) defined in IEC 61000-4-2:2008.

• This product meets the requirements of immunity to conducted disturbances, induced by 

radio-frequency fields in the range of 3V (6V), 150 kHz to 80 MHz as defined in IEC 61000-4-6:2013.

• This product satisfies the requirements of immunity against radiated radio-frequency interference in 

the 10 V/m, 80 MHz - 2.7 GHz frequency range defined in IEC 61000-4-3:2006 + A1:2007 + A2:2010. 

• This product meets the requirements of immunity to radiated, radio-frequency, electromagnetic 

fields from communication equipment as defined in IEC 61000-4-3:2006 + A1:2007 + A2:2010.

• This product meets the requirements of immunity to power frequency magnetic fields at 30 A/m, 

50/60 Hz as defined in IEC 61000-4-8:2009.

• This product meets the requirements of immunity to electrical fast transients/bursts at 2 kV, 100 kHz 

as defined in IEC 61000-4-4:2012.

• The dedicated AC adapter complies with IEC 60601-1-2:2014.
• This product complies with part 18 of the FCC Rules.

Precautions

Portable and mobile wireless communication devices may affect the product. Keep them away 
at a distance of at least 30 cm.

Electromagnetic compatibility

*Specifications change depending on the usage conditions and are subject to change without notice.
*Using, charging, or storing the product at a temperature or humidity outside of environmental specifications   

will reduce the battery capacity and charging efficiency and cause the lighting time to become shorter.

*Photobiological safety (IEC62471)
 This product is classified as Risk Group 1 (Retinal blue light hazard).
 The philosophical basis for Risk Group 1 (Low-Risk) is that the lamp does not pose a hazard due to normal 

behavioral limitations on exposure.

26

27

S

pecifications

S

pecifications

Содержание OPELA III





























Отзывы: