1
.
Check that the calibration kit is firmly
pushed to the bottom of the storage bag.
3
.
Place the battery unit in the front
pocket of the storage bag, and firmly
close the lid of the pocket.
2
.
Place the main unit on the calibration kit,
and firmly close the lid of the storage bag.
*Match the orientation of the main unit with that in
the illustration affixed to the calibration kit.
*Match the orientation of the main unit with that in the illustration affixed to the calibration kit.
*Do not place the dedicated AC adapter on the main unit.
*Do not place the battery unit on the main
unit. The heat sink may get damaged and
cause malfunction.
*Wrap the battery unit with buffer material.
*Store the dedicated AC adapter in the side
pocket of the storage bag.
Storage
5
-
7
Charging
Wearing
Lighting
After Use
Check 1
Check 2
Store in locations according to the Environmental Specifications (refer to 8. Specifications).
Storing in locations with high temperature and high humidity may cause electric shock, leakage,
heat generation, or ignition.
Storing in locations with high temperature and high humidity may cause electric shock, battery
leakage, heat generation, or ignition. It may also reduce the battery capacity and charging efficiency.
Store in locations away from direct sunlight.
The temperature will increase due to direct sunlight, and may cause leakage,
heat generation, or ignition.
Always use the storage bag/hard case when storing or carrying.
Leaving the product out or carrying it without putting it in the storage bag/hard case
may cause failure or damage. Also, if the heat sink is bent or warped, you may be
unable to wear the product, or the light source unit may get hot and malfunction.
Do not store with the connection cord still connected to the battery unit.
It may cause failure.
Do not store in locations with corrosive gas or liquid.
It may cause battery leakage, heat generation, rupture, ignition, or failure.
Check that the light source unit has cooled down to normal
temperature before placing it into the storage bag/hard case.
Putting the light source unit in the bag while it is warm, it may cause a malfunction.
Do not drop the storage bag/hard case.
It may cause failure, damage or injury.
Do not wet the storage bag/hard case.
It may cause failure, damage or injury.
CAUTION
NOTICE
【
Hard case
】
【
Storage bag
】
1
.
Push the square buttons and pull the
latches, then open the lid of the hard case.
2
.
Check that the calibration kit is firmly
pushed to the bottom of the hard case.
3
.
Place the main unit on the calibration
kit and other components to the
correct location and orientation as
shown in the picture.
4
.
Close the lid and push the latches
firmly.
Hard case
Latches
Battery unit
Dedicated AC adapter
Attached belt
Main unit on the
calibration kit
20
21
Storag
e
Storag
e
1
.
Check that the calibration kit is firmly
pushed to the bottom of the storage bag.
3
.
Place the battery unit in the front
pocket of the storage bag, and firmly
close the lid of the pocket.
2
.
Place the main unit on the calibration kit,
and firmly close the lid of the storage bag.
*Match the orientation of the main unit with that in
the illustration affixed to the calibration kit.
*Match the orientation of the main unit with that in the illustration affixed to the calibration kit.
*Do not place the dedicated AC adapter on the main unit.
*Do not place the battery unit on the main
unit. The heat sink may get damaged and
cause malfunction.
*Wrap the battery unit with buffer material.
*Store the dedicated AC adapter in the side
pocket of the storage bag.
Storage
5
-
7
Charging
Wearing
Lighting
After Use
Check 1
Check 2
Store in locations according to the Environmental Specifications (refer to 8. Specifications).
Storing in locations with high temperature and high humidity may cause electric shock, leakage,
heat generation, or ignition.
Storing in locations with high temperature and high humidity may cause electric shock, battery
leakage, heat generation, or ignition. It may also reduce the battery capacity and charging efficiency.
Store in locations away from direct sunlight.
The temperature will increase due to direct sunlight, and may cause leakage,
heat generation, or ignition.
Always use the storage bag/hard case when storing or carrying.
Leaving the product out or carrying it without putting it in the storage bag/hard case
may cause failure or damage. Also, if the heat sink is bent or warped, you may be
unable to wear the product, or the light source unit may get hot and malfunction.
Do not store with the connection cord still connected to the battery unit.
It may cause failure.
Do not store in locations with corrosive gas or liquid.
It may cause battery leakage, heat generation, rupture, ignition, or failure.
Check that the light source unit has cooled down to normal
temperature before placing it into the storage bag/hard case.
Putting the light source unit in the bag while it is warm, it may cause a malfunction.
Do not drop the storage bag/hard case.
It may cause failure, damage or injury.
Do not wet the storage bag/hard case.
It may cause failure, damage or injury.
CAUTION
NOTICE
【
Hard case
】
【
Storage bag
】
1
.
Push the square buttons and pull the
latches, then open the lid of the hard case.
2
.
Check that the calibration kit is firmly
pushed to the bottom of the hard case.
3
.
Place the main unit on the calibration
kit and other components to the
correct location and orientation as
shown in the picture.
4
.
Close the lid and push the latches
firmly.
Hard case
Latches
Battery unit
Dedicated AC adapter
Attached belt
Main unit on the
calibration kit
20
21
Storag
e
Storag
e
