13-Nov.2013 Ver.0.9
TAIYO YUDEN
Tentative
TAIYO YUDEN
3/16
WYSAAVDX7
Control No.
HD-AG-A100174 (1/4)
Control name
General Items
Scope
This specification (“Specification”) applies to the hybrid IC for use Wireless LAN module (“Product”)
manufacture by TAIYO YUDEN Co., Ltd. (“TAIYO YUDEN”)
1.
User Code: WYSAAVDX7
Digit3: Customer Code ex) S: TAIYO YUDEN Standard
Digit8: Software Code ex) X: TAIYO YUDEN Standard
Digit9: Hardware Code ex) 7: TAIYO YUDEN Standard
* User Code may be modified for mass production or other cases.
Please see “m” for more information.
2.
Function: Radio frequency transfer Module. (
IEEE802.11bgn
standard conformity)
3.
Application: PC peripheral, Handy terminal
4.
Structure: Hybrid IC loaded with silicon monolithic and GaAs semiconductor
Ability of lead free mounting at customer's assembly (Heat resistance of this Product) : Yes
Containment of hazardous substance in this Product
*This product conforms to RoHS Directive (2002/95/EC).
5.
Outline: Stacking Connector Type
6.
Marking: IC ID, FCC ID, Japan ID, MAC address and Lot at label on the bottom side.
7. Features:
-
IEEE802.11bgn
standard conformity
-Interface: SDIO
-Embedded MPU for reducing loads on host processor
-Built-in EEPROM (MAC address)
8. Security: WEP (64/128), TKIP, AES, WPA, WPA2, WAPI
9. Packing: Packaging method: Tray
Packaging unit: 90pcs./tray
1080pcs./Box
10. Terminal: Data input-output (20pin Stacking Connector)
“Panasonic Electric Works Co., Ltd: AXK820145WG”
RF input-output (Antenna)
11. Mount: with M2 screw
12. Notes:
a.
Any question arising from this Specification shall be solved through mutual discussion by the parties
hereof.
b.
This Product is not designed for radiation durable and should not be used under the circumstance of
radiation.
c.
The operating conditions of this Product are as shown in this Specification. Please note that TAIYO
YUDEN shall not be liable for a failure and/or abnormality which is caused by use under the conditions
other than the operating conditions hereof.
d.
Please note that this users manual should not be provided to end-users.
e.
The antenna used for this transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
f.
This Product mentioned in this Specification is manufactured for use in consumer products. Before using
this Product in any special equipment (such as medical equipment, space equipment, air craft, disaster
prevention equipment), where higher safety and reliability are duly required, the applicability and
suitability of this Product must be fully evaluated by the customer at its sole risk to ensure correct and
