3.7.2 Reset Configuration Data
In case a conflict occurs after you assign the IRQs or after you configure
your system, you can enable this function to allow your system to
automatically reset your configuration and reassign the IRQs, DMAs, and
I/O address.
3.7.3 Resources Controlled By
Default setting is "Auto (ESCD) ". This setting allows the BIOS to self
detect setting and Plug-and-Play devices during start up. The user can
select and configure IRQs under "Manual" mode.
3.7.4 IRQ Resources
CMOS Setup Utility - Copyright ( C ) 1984 - 2001 Award Software
IRQ Resources
IRQ-3 assigned to
[PCI Device]
Item Help
IRQ-4 assigned to
[PCI Device]
Menu Level >
IRQ-5 assigned to
[PCI Device]
IRQ-7 assigned to
[PCI Device]
Legacy ISA for
devices
IRQ-9 assigned to
[PCI Device]
compliant with the
IRQ-10 assigned to
[PCI Device]
original PC AT bus
IRQ-11 assigned to
[PCI Device]
Specification, PCI/ISA
IRQ-12 assigned to
[PCI Device]
PnP for devices
IRQ-14 assigned to
[PCI Device]
Compliant with the
IRQ-15 assigned to
[PCI Device]
Plug and Play standard
Whether designed for
PCI or ISA bus
architecture
¯
®
¬
: Move Enter : Select +/-/PU/PD : Value F10 : Save ESC :
Exit F1 : General Help
F5 : Previous Value F6 : Fail-Safe Defaults F7 :
Optimized Defaults
3.7.5 IRQ-xx assigned to
If your ISA card is not PnP compatible and requires a special IRQ to
support its function, set the selected IRQ-x assigned to : "Reserved". This
setting informs the PnP BIOS to reserve the selected IRQ for the installed
legacy ISA card.
3.7.6 PCI/VGA Palette Snoop
Содержание PV-DDR
Страница 7: ...Chapter 2 Hardware Setup...
