Taiwan Commate Computer Inc. PV-DDR, Руководство пользователя

Страница: 36 / 49

F5 : Previous Value F6 : Fail-Safe Defaults F7 :
Optimized Defaults
3.6.11 PS2KB Wakeup
This field allows you to use the PS/2 keyboard to power-on the system.
To use this function, make sure JKBV jumper is set to 2-3 pin short,
please refer to " Keyboard Voltage Setting " in Chapter 2 for more
information.
Any Key: Press any key to power-on the system.
Disable: Disable the function.
Wake: When this option is selected, press the "wake up" key of the
Windows 98 compatible keyboard to power-on the system.
Power: When this option is selected, press the "Power" key of the
Windows 98 compatible keyboard to power-on the system.
Ctrl+Fx: The options are from Ctrl+F1 to Ctrl+F12. You can select a
function key you would like to use to power-on the system.
3.6.12 VGA
When set to On, any event occurring at a VGA port will awaken a system
which has been powered down.
3.6.13 LPT & COM
When set to On, any event occurring at a LPT (printer) / COM (serial)
port will awaken a system which has been powered down.
3.6.14 HDD & FDD
When set to On, any event occurring at a Hard Disk or floppy drive port
will awaken a system which has been powered down.
3.6.15 PCI Master
When set to On, any event occurring to the DMA controller will awaken
a
system which has been powered down.
3.6.16 PowerOn by PCI Card
If this item is set as Enabled, PCI peripherals drive PME (Power
Management Event) signal to wake the system from low-power states S1-