3.10 Supervisor/User Password
You can assign, modify, or cancel password settings. To modify, highlight "Supervisor Password"
or "User Password" and press the <Enter> key. The screen will prompt you ("Enter Password:").
Enter your password. The maximum size of the password is 8 characters. System will prompt you to
reenter the password to verify. Remember the passwords are case sensitive.
If you want to remove the passwords, either delete passwords or press <Enter> when prompting for
new password.
If you want it to require password upon initial system startup and upon entering the CMOS Setup
Utility, you will need to change the selection of the (Security Option) under (BIOS FEATURES
SETUP) to "System".
If the setting is "Setup", the system will only require the password you activate CMOS Setup Utility.
3.11 IDE HDD Auto Detection
If your system has an IDE hard drive, you can use this function to detect its parameters and enter
them into the Standard CMOS Setup automatically.
This routine only detects one set of parameters. If your hard disk is formatted using different
parameters than those detected, you have to enter the parameters manually. If the parameters listed
do not match the ones used to format the disk, the information on that disk will not be accessible. If
the auto-detected parameters displayed do not match those that are used for your drive, ignore
them. Type N to reject the values and enter the correct ones manually from the Standard CMOS
Setup screen.
3.12 Exit CMOS Setup Utility
Press the <F10> key to save the setup and exit. Press <ESC> key to exit without saving. Either
saving or not saving modifications, screen will prompt user to confirm, and system will reboot on
exit.
Declaration of Conformity
According to 47 CFR, Part 2 and 15 of the FCC Rules
The following designated product
EQUIPMENT : MAIN BOARD
MODEL NO. : P2BXB
Which is the Class B digital device complies with 47 CFR Parts 2 and 15 of the FCC rules.
Operation is subject to the following two conditions : (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.