Taiwan Commate Computer Inc. 370VB Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 21

Taiwan Commate Computer Inc. 370VB Скачать руководство пользователя страница 8

2.4.4 Infrared Connector (5-pin SIR)

This connector supports the optional wireless transmitting and receiving infrared module, with this
module  and  application  software  such  as  Laplink  or  Win95  Direct  Cable  Connection,  user  can
transfer  files  to  or  from  their  laptops,  notebooks,  PDA,  PCs  and  printers.  The  connector  supports
IrDA  (115.2Kbps,  2  meters)  and  ASK-IR  (56Kbps).  Install  infrared  module  onto  Infrared  connector
and  configure  the  setting  through  ‘UART  Mode  Select’  in  Integrated  Peripherals  to  select  whether
UART is directed for use with COM2 or Infrared.

2.4.5 Wake-up on LAN Connector (3-pin WOL)

The JP1 connector powers up the system when a wakeup packet or signal is received from the
network . This feature requires the Wake up on LAN function in BIOS is set to Enabled and that your
system has an ATX power supply with at least 720mA +5V standby power.

2.4.6 Floppy Disk Drive Connector (34-pin FLOPPY)

This connector supports the provided floppy disk drive ribbon cable. Orient the red stripe to pin 1.

«
...
6
7
8
9
10
...
»

Содержание 370VB






















Отзывы:

Нет отзывов