Taiwan Commate Computer Inc. 370VB Скачать руководство пользователя страница 3

Modem Remote Ring On.

Support NCR SCSI BIOS.

Support 133MHz FSB frequency.

Support Advanced Configuration Power Interface (ACPI).

BIOS Green feature function, and “Plug & Play” Flash ROM.

Support Desktop Management Interface (DMI) through BIOS.

Support Accelerated Graphics Port (AGP) cards for high performance.

RTC Wake Up Alarm: Program the date/time to wake up your system.

1.3 Specifications

CPU

:

-

Supports Intel Socket 370 Celeron Processor in the 

P

lastic 

P

in 

G

rid 

A

rray

(PPGA) package and Pentium III Processor in the Flip-Chip PGA package with
66/100/133MHz Front Side Bus.

Chipset

:

-

VIA VT82C693A & VT82C596B

DIMM

:

-

Supports 3.3V EDO or SDRAM in 3 168-pin banks, each bank consists of
1x168-pin 64-bit DIMM socket, which can support memory sizes of
8/16/32/64/128/256/512 MB modules.

-

Supports up to a maximum of 1.5GB system memory

IDE

:

-

Dual channel PIO and PCI Bus Master IDE ports support up to 4 EIDE devices
for HDD or CD-ROM

-

Supports PIO Mode 4 with data transfer rate up to 14 MB/ Sec

-

Supports Ultra DMA 33/66 (UDMA) with data transfer rate up to 33/66 MB/Sec

BIOS

:

-

Award BIOS V.4.51PG with built-in Anti-Virus, DMI support, and green function
(Plug-and-Play BIOS)

-

Supports CD-ROM, SCSI, and LS120/ZIP boot up

I/O Devices:

-

One FDD control port supports two of the 5.25” or 3.5” floppy drives up to 2.88
MB.

-

Two high-speed 16550 UART compatible serial ports

-

One parallel ports with ECP/ EPP compatibility.

-

One PS/2 mouse port

-

One AT or PS/2 Keyboard connector

IR Port

:

-

One IrDA/ASKIR compatible Infrared interface port. (Cable optional)

USB Ports

:

-

Two Universal Serial Bus (USB) ports support up to 127 peripheral devices.

ATX Power

:

-

Supports Modem remote Ring-On function

-

Supports software power off function

-

Supports RTC Wake-Up.

-

Supports Wake up on LAN.

Expansion Slots

:

-

Three 32-bit PCI expansion slots

-

Two 16-bit ISA expansion slots

-

One 32-bit AGP expansion slot

Operating System

:

-

Supports Windows 95/98/2000, Windows NT, MS-DOS V6.22, OS/2, Novell,
Unix, SCO UNIX…..

Dimension

:

-

220 mm x 210 mm AT Form factor

1.4 Content

The motherboard box contains the following items:

One Motherboard
One IDE Ribbon Cable
One Floppy Ribbon Cable

One Set of Serial Ribbon Cable.

One Parallel Port and one PS/2 Mouse Port Cable. (If keyboard connector is PS/2 type, you
will receive one PS/2 keyboard port and one PS/2 mouse port cable. Besides, there is one
parallel port cable. )
One Driver Disk

Содержание 370VB






















Отзывы: