2
TMAA04-05 Ignition Sense Cable
© Tait Limited July 2016
Radio Programming
1 Startup/Shutdown form: In the
Power On Mode
field, set how the radio responds
when the radio receives a signal to power on from the vehicle’s ignition signal. Select
either ‘Power On’ or ‘Previous State’.
2 Programmable I/O form (Digital tab): Program the
AUX GPI3 line
to ‘Power Sense
(Ignition)’ and
Active
to ‘High’.
Refer to the online help of the programming application for more information.
Installation
1 Connect the auxiliary connector plug to the radio’s auxiliary connector.
2 Cut the wire where the in-line fuse holder will be placed (as close to the ignition/acc
signal as possible).
3 Insert each end of the wire into each of the fuse crimp terminals and crimp them to
force the metal contacts onto the wires with an appropriate crimp tool, eg Utilux
#102B.
4 Push the crimp terminals into the clear plastic fuse holder.
Notice
Do not install the fuse until the installation is ready to be tested.
5 Connect the fused end of the ignition sense cable to the 13.8V signal controlled by the
vehicles ignition key.
6 Insert the fuse into the fuse holder and close it.
7 Check the ignition sense feature is working correctly.
More Information
Refer to your radio provider for more information about this product.
