Tait TM8250, Руководство оператора

Страница: 73 / 142

Operating in conventional mode 73
3 Press Select .
The message Scan key scans
new group appears in the
display.
The next time you activate back-
ground scan, the new group will be your background
scan group.
Suspending a channel from a scanning group
If a member channel of a scan group is busy for a long time
and you do not wish to hear the conversation, you may be
able to use the function key programmed for nuisance delete
to temporarily delete it from the scan group.
When the scan group is next selected, or after the radio has
been turned off and then on, the deleted channel is again
part of the scan group.
Alternatively, the function key programmed for scanning may
be programmed so that:
■
a short key press turns on scanning, and
■
a long key press activates nuisance delete.
Press and hold the function key programmed for scanning to
remove the current channel from the scanning group.
If the operation has been successful,
the message
Channel deleted
from group appears in the display.
Adding or deleting member channels of a
group
Your radio may be programmed so you can add or delete
channels in a voting or scanning group. Changes made are
permanent, and will remain after restarting the radio.
1 Select the group. See “Selecting a group” on page 48 .
Scan key
scans
new group