Tait TM8250, Руководство пользователя

Страница: 71 / 98

72 Operating in MPT trunked mode
Receiving a call
When you receive a call, your radio
displays the caller’s identity and
responds in one of two ways,
depending on the way it was
programmed and the way your network operates.
■
On-air call setup: The radio gives a ring and automatically
accepts the call. The
symbol appears in the display.
■
Full off-air call setup (FOACSU): When a call is received,
the radio rings like a telephone.
To accept the call, press
Answer . The radio gives a beep
and the symbol appears in the display. You may also
be able to accept the call if you briefly press the PTT key
or lift the microphone or hand-held control head off
the clip.
Once the symbol appears, you can proceed with the call,
as follows:
1 Hold the microphone about 5cm (2 inches) from
your mouth.
2 Press and hold the PTT key to transmit.
3 Speak clearly into the microphone and release the PTT
key when you have finished talking.
While you are transmitting, the
red LED glows and the transmit
symbol
appears in
the display.
4 End the call by placing your microphone back onto its
hook or by pressing
Clear . The network may also end the
call if neither you nor the other party transmits for a
predetermined time or if your call time limit is exceeded.
Incoming call
Car 2
Decline Answer
234
11:49
Car 2
Clear
GO 234