DRAFT 3
TD9300 Installation Manual
Connection
21
© Tait Limited March 2015
g
Power LED
The green power LED is lit when power is connected to the
TD9300.
h
RTU Status LED
The green RTU status LED is lit when the RTU is linked to the
TD9300.
i
DMR LED
The green DMR LED is lit when the TD9300 is registered on the
DMR network.
j
1 LED
Reserved for future use.
1)
2 LED
Reserved for future use.
1!
DC input
Connect a 9–36VDC power supply to this input using the supplied
connector. The maximum current drawn by the TD9300 is 4.5A at
24VDC when transmitting at 25W. Refer to
“Connecting DC
Power” on page 23
for more information.
1@
Ground
M4 chassis ground connector. An M4x12mm screw and washers
are supplied with the unit.
Содержание TD9300
Страница 1: ...DRAFT 3 TD9300 Data Terminal Installation Manual MNE 00003 01 Issue 1 March 2015 ...
Страница 14: ...DRAFT 3 14 Introduction TD9300 Installation Manual Tait Limited March 2015 ...
Страница 26: ...DRAFT 3 26 Getting Started TD9300 Installation Manual Tait Limited March 2015 ...
Страница 30: ...DRAFT 3 30 Specifications TD9300 Installation Manual Tait Limited March 2015 ...