manualshive.com logo in svg

Tait TB9300, Спецификация устройства, Страница: 2 / 55

Поделиться
Скачать
Tait TB9300 Скачать руководство пользователя страница 2

2

TB9300 Specifications Manual

© Tait International Limited

 

August 2022

Contact Information

Tait Communications

Corporate Head Office

Tait International Limited
P.O. Box 1645
Christchurch

New Zealand

Imported into the EU by:

Tait Communications GmbH
Stipcakgasse 40

1230 Vienna
Austria

Imported into the UK by:

Tait Europe Limited
Unit A, Buckingham Business Park, Anderson Road
Swavesey

Cambridge, CB24 4UQ
United Kingdom
For the address and telephone number of regional 

offices, refer to our website: 

www.taitcommunications.com

Copyright and Trademarks

All information contained in this document is the 

property of Tait International Limited. All rights 
reserved. This document may not, in whole or in part, 
be copied, photocopied, reproduced, translated, stored, 

or reduced to any electronic medium or machine-
readable form, without prior written permission from 
Tait International Limited.
The word TAIT, TAITNET and the TAIT logo are 
trademarks of Tait International Limited.
All trade names referenced are the service mark, 

trademark or registered trademark of the respective 
manufacturers.
By using a Tait product you are agreeing to be bound 

by the terms of the Tait Software Licence Agreement. 
Please read the Tait Software Licence Agreement 
carefully before using this Tait product. If you do not 

agree to the terms of the Tait Software Licence 
Agreement, do not use the Tait Product. The full 
agreement is available at 

www.taitcommunications.com/our-resources/
legal#Tait_Software_Licence_Agreement

.

Disclaimer

There are no warranties extended or granted by this 

document. Tait International Limited accepts no 
responsibility for damage arising from use of the 
information contained in the document or of the 

equipment and software it describes. It is the 
responsibility of the user to ensure that use of such 
information, equipment and software complies with the 
laws, rules and regulations of the applicable 

jurisdictions.

Enquiries and Comments

If you have any enquiries regarding this document, or 
any comments, suggestions and notifications of errors, 

please contact your regional Tait office.

Updates of Manual and Equipment

In the interests of improving the performance, 

reliability or servicing of the equipment, Tait 
International Limited reserves the right to update the 
equipment or this document or both without 

prior notice.

Intellectual Property Rights

This product may be protected by one or more patents 
or designs of Tait International Limited together with 
their international equivalents, pending patent or 

design applications, and registered trade marks, for a 
complete list please check 

www.taitcommunications.com/our-resources/

legal#Intellectual_Property

Environmental Responsibilities

Tait International Limited is an 
environmentally responsible company 

which supports waste minimization, 
material recovery and restrictions in the 
use of hazardous materials. 
The European Union’s Waste Electrical 
and Electronic Equipment (WEEE) 

Directive requires that this product be disposed of 

separately from the general waste stream when its 
service life is over. For more information about how to 
dispose of your unwanted Tait product, visit the Tait 

WEEE website at 

www.taitcommunications.com/our-

resources/compliance#WEEE

. Please be 

environmentally responsible and dispose through the 

original supplier, or contact Tait International Limited.
Tait will comply with environmental requirements in 
other markets as they are introduced.

Содержание TB9300
























































Отзывы:

Нет отзывов