Tait TB9300, Инструкция по установке и эксплуатации, Страница: 125 / 138

TB9300 Installation and Operation Manual
Glossary 125
© Tait Limited March 2016
DDC
Digital Down Converter. A device which converts the digitized IF signal of
the receiver down to a lower frequency (complex baseband) to suit the DSP.
dispatcher
A person who gives official instructions by radio to one or more mobile
stations.
DMR
Digital Mobile Radio. A set of standards and requirements endorsed by
ETSI and intended for professional mobile radio (PMR) users.
dotted quad
A method for writing IPv4 addresses. The form is DDD.DDD.DDD.DDD
where DDD is an 8-bit decimal number.
downlink
The transmission path from fixed equipment to mobile stations.
DSP
Digital Signal Processor.
duplex
Providing transmission and reception in both directions simultaneously.
duty cycle
Used in relation to the PA, it is the proportion of time (expressed as a
percentage) during which the PA is transmitting.
EIA
Electronic Industries Alliance. Accredited by the American National
Standards Institute (ANSI) and responsible for developing
telecommunications and electronics standards in the USA.
EMC
Electromagnetic Compatibility. The ability of equipment to operate in its
electromagnetic environment without creating interference with other
devices.
ETSI
European Telecommunications Standards Institute. The non-profit
organization responsible for producing European telecommunications
standards.
fallback mode
An operational mode of Tait DMR trunked networks. It comes into effect
when the base station loses communication with the trunking node
controller. Fallback mode turns one of the base station’s two logical
channels into a control channel. In this mode the base station functions
almost as an open channel, available to all calls without requiring
authorization.
FCC
Federal Communications Commission. The FCC is an independent United
States government agency that regulates interstate and international radio
communications.