TB7100 Installation Guide
Installation
5
© Tait Electronics Limited May 2005
1.3
Regulatory Information
1.3.1
Distress Frequencies
The 406 to 406.1MHz frequency range is reserved worldwide for use by
Distress Beacons. Do
not
program transmitters to operate in this frequency
range.
1.3.2
FCC Compliance
1
This device complies with part 15 of the FCC Rules. Operation is subject
to the condition that this device does not cause harmful interference.
1.3.3
Unauthorised Modifications
Any modifications you make to this equipment which are not authorised by
Tait Electronics Ltd. may invalidate your compliance authority’s approval to
operate the equipment.
1.3.4
Health, Safety and Electromagnetic Compatibility in Europe
In the European Community, radio and telecommunications equipment is
regulated by Directive 1999/5/EC, also known as the Radio and
Telecommunications Terminal Equipment (R&TTE) directive. The
requirements of this directive include protection of health and safety of users,
as well as electromagnetic compatibility.
Intended Purpose of
Product
This product is an FM radio transceiver. Its intended purpose is for radio
communication in Private Mobile Radio (PMR) services or Public Access
Mobile Radio (PAMR) services.
Important
This product can be programmed for frequencies or emis-
sions that may make its use illegal. A license must be
obtained before this product is used. All license require-
ments must be observed. Limitations may apply to trans-
mitter power, operating frequency, channel spacing, and
emission.
Declaration of
Conformity
Brief Declarations of Conformity appear
on page 18
. You can download the
formal Declaration of Conformity from
http://eudocs.taitworld.com/
. You
can also obtain a signed and dated paper copy of the Declaration of
Conformity from Tait Europe Ltd.
1. Refer to the TB7100 Specifications Manual for more information on the compliance standards to
which the TB7100 base station has been tested and approved.
