Tait T800 - 22 - 0x00, Справочное руководство

Страница: 13 / 74

M800RACK-00-100 Section 1
Copyright TEL 30/8/99
T800S II Numbering System
Conventional Rack Systems ordered from RSD using the adjacent Numbering
System will be configured as follows:
Rack Configuration
The Racks used in these configurations are as per Section 2 of this guide, which
illustrates the factory default specifications.
Each Rack is fully wired and set-up for AC or DC power supply options.
(Refer to Section 3).
A Speaker / Programming Port Panel and all required Blank Panels and are fitted as
standard to each rack as required.
If the System Type is code “B”, a co-axial relay is fitted as standard. If any other
code is used, then relays must be requested if required.
Module Configuration
All Rx and Ex/Tx modules are fitted with second D-ranges as Standard.
ie.(T8XX-XX-0200)
All technical information on this Rack configuration is available from RSD.