Tait t2020 Скачать руководство пользователя страница 25

Страница: 25 / 27

T2020 Operator's Manual

'Status' indicates that your radio is ready for you to select a status code relating
to your current activity. You may use the

keys to choose a status

code or description.

'Channel' indicates that your radio is ready for you to enter information to

enable it to select a new channel. You may use the

keys to choose

from a list, the

key to enter a label, or the number keys.

A flashing

indicates that the current channel is in the 'Repeater

Talkaround' mode.

'Alphanumeric' indicates that your radio is ready for you to enter some

information from the keypad as letter or number characters, such as a channel
label.

When the radio is operating normally, this indicator will be off. If it is on
continuously, the signalling mute (if active) is open. This may be because the
microphone is off hook or the

key has been pressed. If the indicator is

continually flashing, the

has been pressed for long enough to open the RF

squelch.

'Aux' indicates the state of the auxiliary options switch. Depending upon the
configuration of the auxiliary options switch, the

indicator may be

either on continuously or off continuously, or may only come on whilst the

key is held pressed.

'Function' indicates that your radio is ready for you to change its user

programmable options. The display will show the last option viewed
previously. You may use the

keys to choose a new option and the

key to change it.

'Enter' comes on when the

key is pressed.

All indicators off. If your radio is able to transmit DTMF tones, it is possible
only in this mode.

Содержание t2020




























Результаты поиска

Содержание t2020

Отзывы:

Бренды по названию

Популярные бренды

Tait t2020, Руководство оператора

Результаты поиска

Содержание t2020

Отзывы:

Бренды по названию

Популярные бренды