Tait t2020, Руководство оператора

Страница: 15 / 27

T2020 Operator's Manual 11
3 Queuing Calls
The caller identity and the channel of the received call will be put on the Call Queue
when:
- the internal alert (ringing) of the received call stops;
- another call is received before the previous one is queued.
Note that after the incoming call has been queued, it is automatically
cleared/answered and the radio will resume what it was doing prior to receiving the
call. This includes the resumption of scanning, if the radio was scanning prior to
receiving the call.
4 Queue Not Empty
Whenever the queue is not empty, the Function Menu Entry mode will automatically
be the default mode, with the "
CALL QUE " function as the current selected item,
regardless of what has been programmed for the default mode. This will mean that
the radio will always revert to the Function Menu Entry mode after a period of no
user activity if there was something in the call queue. In addition to that, the red
(FCN) indicator will flash whenever the radio is in the Function Menu Entry mode.
5 Queue Full
Whenever the queue is full, the radio will continue receiving calls but will not
resume what it was doing prior to receiving the call. This means that the radio will
not resume scanning if it was scanning prior to receiving the call. This will allow
calls to be received only on the held channel. For every other call that is received,
the information on the previous call will be overwritten.
To Divert a Received Call (Selcall Option Fitted)
This feature will enable the radio to be put into "Call Diversion Mode", where any valid
incoming Selcall sequences will cause the radio to transmit another user defined Selcall
or DTMF sequence on the programmed "Call Diversion Channel". The sequence
(number) to be transmitted and the call type (Selcall or DTMF) can be set from the front
panel when putting the radio into "Call Diversion Mode".