background image

2

T02-00004-0201/T02-00004-0202 Horn Speaker

© Tait Limited April 2013

 

Safe Mounting and Operation of the Horn Speaker

Before installation or use, be sure to carefully read all the instructions in this section for 
correct and safe installation and operation. After reading, keep this document handy for 
future reference.

Warning

Incorrect installation of the horn speaker may result in death or serious 

injury. The horn speaker could break loose due to the extreme forces applied during 
a collision or braking. 

Install the horn speaker only to a mounting surface or structural element and 
in a location that can structurally support the weight of the horn speaker 
(13.2lbs [1.4kg]) during a collision. 

Use nuts and bolts that are appropriate for the mounting surface’s structure 
and composition. 

Tighten each nut and bolt securely. Ensure that the mounting bracket has no 
loose joints after installation.

Check regularly whether the horn speaker is still secure and hasn’t corroded. 
Retighten or replace if necessary.

Warning

Attach a safety wire to the unit when mounting in locations high above 

the ground.

Warning

Choose a mounting position for the horn speaker where it will not inter-

fere with the operation of any of the vehicle controls.

Warning

When drilling holes in the vehicle, check that drilling at the selected 

points will not damage existing wiring, petrol tanks, fuel and brake lines, or battery 
cables.

Warning

To avoid accidental air explosions, do not use the unit around gasoline, 

thinner or other combustibles.

Warning

Protect the unit from exposure in snowy areas, as the weight of snow 

build-up could cause the speaker to down or drop.

Warning

Do not operate the horn speaker for an extended period of time with the 

sound distorting, This is an indication of a malfunction, which in turn can cause 
heat to generate and result in a fire.

Caution

Do not stand or sit on, nor hang down from the horn speaker as this may 

cause the speaker to fall down or drop.

Notice

When installing the horn speaker, be sure that water and snow cannot accumu-

late inside the horn.

Содержание T02-00004-0201

Страница 1: ...ions Please follow exactly any instruction that appears in the text as an alert An alert provides necessary safety information as well as instruction in the proper use of the product This document uses the following types of alert Warning This alert is used when there is a hazardous situation which if not avoided could result in death or serious injury Caution This alert is used when there is a ha...

Страница 2: ...peaker is still secure and hasn t corroded Retighten or replace if necessary Warning Attach a safety wire to the unit when mounting in locations high above the ground Warning Choose a mounting position for the horn speaker where it will not inter fere with the operation of any of the vehicle controls Warning When drilling holes in the vehicle check that drilling at the selected points will not dam...

Страница 3: ...ill Pattern of Mounting Bracket Not to Scale Wiring the Horn Speaker Notice Be sure to note the following polarities Black speaker cable Positive White speaker cable Negative or COM 1 Connect the horn speaker cable to the extension cable using a suitable waterproof con nector Connect the black positive wire of the speaker cable to the red wire of the extension cable Connect the white negative wire...

Страница 4: ...e stripe positive and receptacle into position 3 Insert the black negative wire and receptacle into position 2 4 To connect the horn speaker plug the flying lead into the extension cable To discon nect the speaker release the locking mechanism and unplug the flying lead Switching between the Horn Speaker and a Remote Speaker The horn speaker and the remote speaker TMAA10 03 or TMAA10 06 cannot be ...

Отзывы: