Web :www.taishansports.cn
2. Contrary to the unfolding process, first remove the 2
sleeve in Figure 8 from the front protective sleeve; then remove the protective
sleeves on both sides; use a hook wrench to loosen the 1
in Figure 1 ; Turn the manual hydraulic pump control handle to the "A" mark,
press the manual hydraulic pump handle to fold the extension arm until the
extension arm stops falling.
Figure 8 Sheath installation
7) Basketball hoop placement and debugging:
1. As shown in Figure 9, the dotted line represents the ground, and the width of
50mm is the field end line. Place the basketball stand on the center line of the
length of the court, adjust the position
between the protective sleeve and the outer side of the end line is 2000mm;
Shandong Taishan Sports Equipment Co.,Ltd
:www.taishansports.cn
2. Contrary to the unfolding process, first remove the 2-removable protective
sleeve in Figure 8 from the front protective sleeve; then remove the protective
e a hook wrench to loosen the 1-adjusting sleeve shown
in Figure 1 ; Turn the manual hydraulic pump control handle to the "A" mark,
press the manual hydraulic pump handle to fold the extension arm until the
extension arm stops falling.
allation
7) Basketball hoop placement and debugging:
1. As shown in Figure 9, the dotted line represents the ground, and the width of
50mm is the field end line. Place the basketball stand on the center line of the
length of the court, adjust the position of the basketball stand so that the distance
between the protective sleeve and the outer side of the end line is 2000mm;
Shandong Taishan Sports Equipment Co.,Ltd
removable protective
sleeve in Figure 8 from the front protective sleeve; then remove the protective
adjusting sleeve shown
in Figure 1 ; Turn the manual hydraulic pump control handle to the "A" mark,
press the manual hydraulic pump handle to fold the extension arm until the
1. As shown in Figure 9, the dotted line represents the ground, and the width of
50mm is the field end line. Place the basketball stand on the center line of the
of the basketball stand so that the distance
between the protective sleeve and the outer side of the end line is 2000mm;
