Web :www.taishansports.cn
5) Tighten the outrigger protective cover to the front end of the outrigger with
Velcro;
6) Unfolding and folding of the arm:
1. Turn the control handle of the manual hydraulic pump to the "B" mark, and
press the handle of the manual hydraulic pump to e
process, the base of the basketball stand will then rotate upward and fall to the
ground. The unfolding situation is shown in Figure 2. After unfolding, use a
hook wrench to lock the 1
protective sleeves on both sides (the back of the side protective sleeve and the
velcro on the base) according to the position Connect firmly. Finally, put the
2-detachable protective cover in Figure 8 into the vacant position.
Figure 7 Arm extension
Shandong Taishan Sports Equipment Co.,Ltd
:www.taishansports.cn
5) Tighten the outrigger protective cover to the front end of the outrigger with
6) Unfolding and folding of the arm:
1. Turn the control handle of the manual hydraulic pump to the "B" mark, and
press the handle of the manual hydraulic pump to extend the arm. During the
process, the base of the basketball stand will then rotate upward and fall to the
ground. The unfolding situation is shown in Figure 2. After unfolding, use a
hook wrench to lock the 1-adjustment sleeve as shown in Figure 7 and st
protective sleeves on both sides (the back of the side protective sleeve and the
velcro on the base) according to the position Connect firmly. Finally, put the
detachable protective cover in Figure 8 into the vacant position.
Shandong Taishan Sports Equipment Co.,Ltd
5) Tighten the outrigger protective cover to the front end of the outrigger with
1. Turn the control handle of the manual hydraulic pump to the "B" mark, and
xtend the arm. During the
process, the base of the basketball stand will then rotate upward and fall to the
ground. The unfolding situation is shown in Figure 2. After unfolding, use a
adjustment sleeve as shown in Figure 7 and stick the
protective sleeves on both sides (the back of the side protective sleeve and the
velcro on the base) according to the position Connect firmly. Finally, put the
detachable protective cover in Figure 8 into the vacant position.
