Shandong Taishan Sports Equipment Co.,Ltd
Web: www.taishansports.cn
3) As shown in the figure below, use L-allen wrench to install and fix the
B-upright component and C-bar rail with I-adjusting washer, H-support pad
and E-hex socket screw.
Note: The installation quantity of adjusting washer can be adjusted
according to the actual situation. It is suggested to install one on each
upright(usually each upright is equipped with 2 washers). After tightening
the hex socket screw, there will be no obvious block when adjust the width
of two rails. Shake the bar rail vertically to ensure there is no obvious
shaking between the bar rail and the upright.If shaking occurs, remove the
adjusting washer. If there is obvious block when adjust the width of two
rails, increase the adjustment washers to 2 pieces.
