Tainet T-288C, Руководство пользователя

Страница: 123 / 131

A3-2 AUXILIARY SUMMARY FOR FAX FUNCTION
A3.1 Command Summary
All of these commands, FTS and +FRS, must be the last command on the
command line. The commands are:
Command Description
+FTS=<Time> Stop transmission and pause,(10 ms intervals 0-255)
+FRS=<Time> Wait for silence,(10 ms intervals 0-255)
+FTM=<MOD> Transmit data with <MOD> carrier
+FRM=<MOD> Receive data with <MOD> carrier
+FTH=<MOD> Transmit HDLC data with <MOD> carrier
+FRH=<MOD> Receive HDLC data with <MOD> carrier
The MOD parameter may take on the following values:
Value Modulation & Speed
3 V.21 ch.2 300
24 V.27 ter 2400
48 V.27 ter 4800
72 V.29 7200
96 V.29 9600
A3.2 Capabilities Identification and Control
A3.2.1 Service Class Indication, +FCLASS?
The current Service Class setting of a facsimile DCE is interrogated by the
"+FCLASS?" command. The information text response is a single value:
0 indicates a data modem
1 indicates a Service Class 1 facsimile DCE
other values are reserved
A3.2.2 Service Class Capabilities, +FCLASS=?
The Service Classes available from a facsimile DCE are probed by the "FCLASS=?"
command. The information text response is a list of values, separated by commas. For
example, a DCE that supported data communication and facsimile Service Class 1
would respond: "0,1".
A3.2.3 Service Class Selection, +FCLASS=<value>
The Service Class may be set by the DTE from the choices available (see above) ,
using the "+FCLASS=<value>" command. To configure a DCE for Service Class 1,
the DTE issues the command: "AT+FCLASS=1".