8
CARE AND MAINTENANCE
If the speargun is used correctly minimum care is needed.
1. A
fter each use rinse speargun and spear with large amount of fresh water, focusing on the
barrel and power adjusting rod. Wipe spear dry, preferably with oiled rags. Make
absolutely
sure that there
is
no sand left on the spear and barrel,
as with the presence of sand
it is
possible to damage barrel and vacuum
rubber
ring.
2. Always check your
hand loader
for damage; replace it with a new one if necessary.
3.
If your spear is
bent
then straighten it or replace it with a new one.
4.
We recommend to store and carry the spear with caps on (Pos. 1 Picture
9)
5.
Store your gun in dark, cool place
.
6. Take care that adjusting rod is set at maximum power while storing.
7.
For long storage half of the air should be released.
8.
Annual maintenance, including replacement of lubricating oil is a must.
9. Before using after long-term storage we recommend:
-
Fill the barrel with 1 cm³ of oil;
-
Insert the spear into the barrel; fix the
line
slid
e
with the holder.
-
Lean the tip against firm surface and imitate the process of loading without
hooking the piston.
10.
When your speargun needs repair or maintenance contact the manufacture or service
centers.
Picture 9
1.
9
Spears supplied in
Ж
8
mm
,
Ж
7
mm and
Ж
6,5
mm
in two mods: threaded and with spear tips.
P
olyurethane seal at the spear tang being fixed at the back excludes
jamm
ing of
line
e
the
slid and allows reduction of the sound volume as compared
.
to the alternative design solutions
Sharp
spear tip allows
s
piercing the scale of big fish
at large distances
Spear caps make transportation and storage of spear
and
line more convenient
Cap
Spears
TAIMEN tip
MARLIN tip
Increased piercing power,
special grinding helps put
the spear into rotation
pierces the scale
s
and bones of big fish easily
SPEAR SIZE TABLE
Spear with tip,
mm
340
440
540
640
800
940
300
400
500
600
760
900
Gun model
PVM
400
PVM
500
PVM
600
PVM
700
PVM
850
PVM
1000
Threaded spear,
mm
