Taiji TSK-160, Инструкция по эксплуатации, Страница: 8 / 12

1) Remove a cap of the Cubic container.
2) Check the knob of the Stopcock is set at
the closed position. (Fig. 13)
Then, screw it into the mouth of the
container. Be sure the outlet of the
Stopcock facing to the right. (Fig. 11)
*Sake will leak out if this screw-in process
proceeds improperly.
3) Place the cubic container on the top
of the unit and position the mouth of
the container downward.
The Sake outlet of the Stopcock should
face to the left. (Fig. 12)
4) Screw the Joint hose into the outlet
of the Stopcock. This joint connects
Cubic container and the dispenser
main body. (Fig. 12)
5) Before dispensing, make sure the
Stopcock and Joint hose are firmly
fastened. Also, check the Nozzle has
been pulled up.
6) Turn the knob of the Stopcock to
the right and adjust it to the
“Open position”. (Fig.13)
1) Put the accessory cap to a Sake bottle.
(Fig.10)
2) Make sure the Nozzle has been pulled up.
3) Insert the Sake bottle in the Bottle
holder funnel. (Fig. 10)
(Fig.10)
Bottle Type
Cubic container Type
(Fig.13) Wide gap
“Open position” “Close position”
Narrow gap
Knob
Sake outlet
Open - Close - Open
- Close - ......
Cubic container
(Fig.12)
(Fig.11)
-8-