－10－
Maintenance for every week or so
Filter
1． Hold both sides of the filter, raise it upward to detach its bottom end from
the body, and pull it diagonally downward to remove it.
After Use and Maintenance
1． Switch off then remove plug from electric outlet after the fan stops completely.
＊
The fan will continue to rotate for about 10 seconds to cool the components.
2．
Take out remaining towels, etc. and wipe inner box clean to remove residual
moisture.
3． Empty water accumulated in the drain tray. Wash clean when considerably stained.
4． Stains on the body should be wiped clean with a dry cloth or a tightly wrung
wet cloth.
＊
Use a neutral detergent when stains are severe. Do not use cleansers
containing abrasives or solvents such as paint thinners.
＊
The appliance shall not be cleaned with a water jet.
5． Leave the door of the cabinet open for a while for moisture to dry as a means
to prevent odors.
Post-use Instructions
1
2
２.
Suck dust by using a vacuum cleaner, etc.
3. Reattach the filter by the reverse procedure of that for removal.
＊
Frequent cleaning of filters is a requisite for the cabinet’s
best performance.
＊
Do not operate the product while the filter is detached.
Otherwise, dust can enter into the body, causing a failure.
