5
ADJUST AIRFLOW CONTROL
The deck contains two air holes that guide the incoming air directly to the coil. The large air hole has a diameter of 1.2
mm, while the small air hole has a diameter of 1.0 mm. The holes are directed diagonally inwards. This will direct the
air directly to the coil. At the side of the base are the corresponding air entries.
The air supply can be regulated via the AFC ring on the outside of the base. The ring engages noticeably at several
points and allows a very precise adjustment of the air flow. Depending on the position of the AFC ring, either the small
or large air hole is opened. It is also possible to open both air holes (opposite), or even to open the air holes only half-
way.
The AFC ring has a two-sided stop. To open only the small air hole (1.0 mm), turn the AFC ring far to the left. To open
only the large air hole (1.2 mm), turn the AFC ring all the way to the right (stop).
In this case, the left and right sides refer to the corresponding direction from above (atomizer is mounted on a
mod).
The following settings are possible:
* to remove atomizer
WARNING
•
Never vape with completely closed airflow control.
•
Make sure there is sufficient air supply at higher wattage levels.
IMPORTANT
The air holes have an diagonally, inwardly directed bore, so that the air is directed to the coil. Depending on the selected
air outlet, it may be necessary to slightly change the position of the coil in order to obtain an optimal vape experience.
!
Left stop
Right stop
Both airholes
closed *
Small airhole
half open
Small airhole
complete open
Both airholes
half open
Both airholes
complete open
Large Airhole
half open
Large airhole
complete open
1.0 mm
1.2 mm
viewed from above
!