2
1.2 Installation and connection
1.2.1 Installation
1U High Definition Digital Video Tracking Matrix
Switcher just needs to put it into the cabinet, and fix it
by screws. As figure 1.3.
Figure 1.3 Installation
1.2.2 Connection between Mixed Switcher and PC
High Definition Digital Video Tracking Matrix Switcher
can be can be controlled by Central Control System via
RS-232 interface COM1, this interface is also used for
software upgrade. As figure 1.4.
1.2.3 Connection with input, output devices
High Definition Digital Video Tracking Matrix Switcher
supports various digital video signal sources, including:
full HD (3G), HD and SD. As figure 1.4.
Please use good quality Twisted Pair cable to connect
input and output device, i.e. RG59 and RG60.
Control Interface:
Video Track Off
COM (RS-232)
9 pin female D connector
COM1
Baud rate: 9600, data: 8 bits,
stop: 1 bit, no parity check bit
RJ45
To matrix PC software
RS422/RS485
、
TAINET
Invalidation
Video Track On
COM (RS-232)
9 pin female D connector
COM1
Baud rate: 9600, data: 8 bits,
stop: 1 bit, no parity check bit
RJ45 Invalidation
TAINET
Baud rate: 19200, to TO VIDEO
SWITCHER of main unit
RS422/RS485
Baud rate: 9600, to doom
camera
Note:
)
If connected with camera by RS232 protocol,
the matrix switcher and the camera must be
common ground.
