2.3.3 Suspension mounted
Figure 2.8 Suspension mounted
Mounting steps:
Step 1:
Position the mounting bracket on the ceiling according to the installation location of the TES-568M and mark the
positions of the drilling holes. Drill two holes (5 mm diameter, 30 mm depth) into the ceiling.
Step 2:
Put the included rubber plugs into the mounting holes on the ceiling;
Step 3:
Fix the mounting bracket on the ceiling with M3 screws;
Step 4:
Install the other mounting bracket at the top of the TES-568xM with M3 screws;
Step 5:
Put the two ends of the suspension into the mounting bracket and fix them together with M3 screws and M3 nuts.
WARNING:
This installation method is applicable when the ceiling thickness is greater than the length of the rubber plug.
15
