Chapter 3
．
Setup and Operation
After installation and connection and prior to the meeting,
the decoder should be configured through the dialog
menu and button. The term “interface” used hereinafter
means the information displayed on the LCD as the user
interface.
A) Starting initialization
If power is supplied, the recorder will start initialization:
B
）
LCD menu
When the initialization is finished, press the “MENU”
button to go to the menu on the LCD, includes:
“1. Net Status”
“2. Net Setting”
“3. Save Parameter”
“4. Rename”
“5. Video Setting”
“6.
Audio Setting”
“7.
Default”
“8. About”
■ Press the “MENU” button to go to the corresponding
submenu;
■ Use the “
/
” button to switch from term to term.
3.1 Net Status
Decoder network information includes: type, IP address,
subnet mask and gateway.
■ Use the “
/
” button to switch from term to term;
■ Use the “EXIT” button to return to the upper level
menu.
3.2 Net Setting
Use the “
/
” button to enable DHCP or not;
If “Y” is selected, it stands for obtain a dynamic IP
address automatically, use the “MENU” button to save
and return to the upper level menu;
If “N” is selected, it stands for set a static IP address
manually, uses the “MENU” button to go to step a).
a). Set up unique “IP Address” for the encoder:
1).
Select “IP Address” and press the “MENU” button to
go to setup IP address interface:
2).
Use the “
/
” button to switch between the four
numbers;
3).
Use the “MENU” button to edit the selected number;
4).
Use the “
/
” button to decrease/increase the
number and press “MENU” to save;
5).
Press the “EXIT” button and “Press ‘MENU’ to
Enable Setting” will be displayed on the LCD;
6).
Press the “MENU” button to save and return to the
upper level menu.
b). Setup “Subnet Mask” and “Gateway”
Same chronological order as for “IP Address” set up.
3.3 Save Parameter
a). Press “
/
” to select save the parameters or not;
If “
Y
” is selected, system parameters can be saved;
If “
N
” is selected, system parameters cannot be
saved;
b). Press the “MENU” button to confirm and to return to
the upper level menu.
Note
：
Please save the setting in “Save Parameter” or
the setting will loss after power off.
3
