3.4 Rename
Set alias for the decoder with a maximum length of 16
characters. It is convenient to identify them.
a). Press the “MENU” button to enter the name setting
interface, the cursor blinks under the first character;
b). Press the “
/
” button to move the cursor;
c). Press the “MENU” button to modify the character;
Press “
” clear all the characters after the cursor;
press the “
” button to select the new character;
d). Press the “MENU” button to save at each character;
e). Press the “EXIT” button to return to the upper level
menu after setting finished.
3.5 Video Setting
Select the video output resolution of the decoder.
a). Press the “MENU” button, select a resolution by “
/
”
buttons and then press the “MENU” button to confirm;
b). Press the “EXIT” button to return to the upper level
menu.
3.6 Auido Setting
Press the “MENU” button, adjust the volume (range:
MUTE, -29 ~ 0 dB) by “
/
” buttons and then press the
“MENU” button to confirm and return to the upper level
menu.
3.7 Default
a). Use the “
/
” button to select default or not;
b). Press the “MENU” button to confirm and to return to
the upper level menu.
3.8 About
Decoder information includes: firmware version and
series number, shown as in the following figure - press
the “MENU” or “EXIT” button to return to the upper level
menu.
C) Firmware upgrade
After boot-strap and initialization, insert a U drive with
upgrade application will enter the update interface
automatically:
Press “EXIT” to select “No”, it stands for not
updating and returning to the initial interface;
Press “MENU” to select “Yes”, it stands for
confirming and then begin to update. System will
reboot when finish updating.
Note
：
Please do not cut off the power during updating.
Note
：
Please save the setting in “Save Parameter” or
the setting will loss after power off.
Note
：
Please save the setting in “Save Parameter” or
the setting will loss after power off.
4
