Taiden EP-820AS, Инструкция по установке и эксплуатации

Страница: 33 / 58

3.3 Connection
3.3.1 Connecting to the CMU
The HCS-3938 series discussion unit is equipped with a
1.5-metre long 6P-DIN cable with a standard male
connector. To connect to CMU, just connect the male
connector of the first unit to the output of the HCS-3900M
main unit.
In case of a long distance between the conference unit
and the CMU, use CBL6PS extension cable. One end is
equipped with a 6P-DIN male connector and the opposite
end with a female connector. Just connect the female
connector of the cable to the next conference unit, and
connect the male connector to the output of the main unit.
Figure 3.2 HCS-3938 series unit connected to the CMU
3.3.2 Connection between conference units
HCS-3938 series conference units of the HCS-3900
Economical Digital Conference System are daisy-chained
easily.
When connecting to another unit, just connect the 6P-DIN
standard female connector on the 0.6-meter cable of the
unit to the 6P-DIN standard male connector on the
1.5-meter cable of the next unit.
Figure 3.3 Connection between HCS-3938 series units
3.3.3 Connection between conference units
An external earphone can be connected to the external
earphone jack at the lateral side of the conference unit. Its
volume can be adjusted by the earphone volume adjust
button. The external earphone shall have a Ø 3.5 mm
plug, as in the following figure:
Functions and indications:
1 Left stereo channel signal
2 Right stereo channel signal
3 Power ground/Shield
25