Taicom V1103D, Руководство пользователя

Страница: 51 / 97

51
5.7 Routing Table
5.7.1 Configure
Static Routing
:
This function allows manually defined by users as the only path to the
destination. Users can configure the static routing path to Broadband Router.
For example :
There have one pc with two interfaces in this area, one interface is
connected to Broadband Router (domain A), and the other connected to
another Server (domain B). Users need to set the static routing path in
Broadband Router to let is recognize that there is another domain in this area.
These settings enable the packets from domain A reach the destination in
domain B via the gateway configured in Broadband Router.
Gateway Mode
Router mode:
It will disable all the functions those are related to NAT, such as Virtual
Server, DMZ, Multi-DMZ, IP Filter, DoS and so on
Router mode supports neither PPPoE nor Dial-up connection. It's only
been used for the route between two domains. In other words, router mode
supports the transmission of data between two different domains via WAN
port. The Broadband Routers needs to use static routing or dynamic routing
(RIP1/RIP2) to obtain routing table from each other. Thus, the PCs in domain
A and PCs in domain B can access the data that are in another domain via
the router mode.