Tahoe TI3 KGP80B, Инструкция по эксплуатации и перечень запасных частей

Страница: 5 / 14

4
continuous to be used after adding an adjustment shim on the shaft shoulder.
Fig .1 Structure diagram of self-priming pump
1)Drain screw cock 2)Connector of inlet pipe 3)Tighten net of inlet pipe 4)Connector
5)Door valve 6)Screw cock of adding water 7)Elbow of outlet 8)Case of pump
9)Machinery seal 10)Impeller 11)Flow guidance 12)Pump cover
OVERALL DIMENSIONS TABLE OF SELF-PRIMING PUMP
Unit: mm
Type H1 H2 H3 H4 L1
50B 348 297 151 106 248
80B 410 348 171 106 325
5.When change machinery seal, be sure to apply adhesive to the connection between steel part
“#7”and pump cover. When fixed it, do not hit by force to prevent wear slice fracture.
Fig .2 Structure diagram of machinery seal.
1. Seal ring 2. Ceramics moving ring 3. Graphite static ring
4. Corrugated pipe 5.Washer 6.Spring 7. Steel part