Tahoe 971, Руководство пользователя

Страница: 13 / 20

8
3.3.3. CRC4 checksum
The command below enables and disables, respectively, the CRC4
checksum transmission:
sethdlc hdlc0 crc4 on
sethdlc hdlc0 crc4 off
3.3.4. Port range and sensivity selection
The command below switches betweed short haul (50m range)
and long haul (2000m range) mode:
sethdlc hdlc0 short
sethdlc hdlc0 long
9
4. Configuring the Frame Relay
After setting up a connection to the Frame Relay network, user is
usually supplied with following information:
LMI signaling: ANSI
DLCI number: 99
Remote router address: 194.204.100.129
Client router address: 194.204.100.130
WAN link subnet: 194.204.100.128
Subnet mask: 255.255.255.252
After compiling and installing the drivers described below
commands should be issued to configure the Frame Relay access - set
the LMI signaling and create the PVC interface.
4.1. Linux
sethdlc hdlc0 fr lmi ansi
sethdlc hdlc0 create 99
ifconfig hdlc0 up
A new pvc0 interface would appear. It should be configured using
the ifconfig command to set supplied IP addresses:
ifconfig pvc0 194.204.100.130 netmask 255.255.255.252
pointopoint 194.204.100.129
4.2. FreeBSD
ifconfig th0 up
sethdlc th0 fr lmi ansi
sethdlc th0 create 99
A new pvc99 interface would appear. It should be configured
using the ifconfig command:
ifconfig pvc99 194.204.100.130 194.204.100.129
4
4.2
4.1
3.3.4
3.3.3