Tahoe 4681, Руководство пользователя

Страница: 18 / 52

10
Tahoe 4681 (4-port G.shdsl.bis/FastEthernet modem card)
rest is available to provide compatibility with devices from other manufacturers. Moreover
TCPAM32 allows throughputs from 256 kbps to 5696 kbps per line, while TCPAM16 – from
128 kbps to 2304 kbps and TCPAM4 – 64 kbps. The “auto” setting forces use of TCPAM32
for speeds greater than or equal to 256 kbps per line and TCPAM16 or TCPAM4 for lower
rates.
bundle < interface > txgain < value >
– sets transmitter gain of all lines in the bundle.
The gain may be selected from 0.0 – 1.6 range. The modem reach may be slightly higher if the
gain is increased. New mode is set after renegotiating the DSL connection.
bundle < interface > reset
– renegotiates connection on all lines in the bundle
bundle show
– shows current settings
config
The config command displays current configuration. The command output can be entered on
another modem to make an exact copy of the configuration.
console
This command is used to enable or disable password protection of the serial console. By default
the console is unprotected and user has full access to the modem. By entering:
Tahoe> console passwd on
the password requirement is enabled and modem will ask for it in the same manner as during the
telnet connection. To disable password protection type:
Tahoe>
console passwd off
dhcp
The dhcp command is used to configure the DHCP server or DHCP relay. Refer to the DHCP
Server Configuration section for detailed information about that command.