11
14
12
15
13
16
run water to ensure the unit is
sealed, then clip on covers
Clip on covers
push rail and bottom rail bracket
hard on to mounted top bracket
ensure edge aligns with plumb line.
mark holes. Set aside, drill clearance
into lining and pre-drill support
Slide shelf (if included) and
handpiece holder on to top of rail
push rail and bracket back on to
top bracket and clip on angled
cover
Seal holes. drive in screws (and
wall plugs where appropriate).
Check alignment with plumb line
mark holes
No footrest
Separate footrest
go to 19 on
page 8
Clip on cover
1
2
57
5mm
