4
5. ASSEMBLING - ZAP STAND OR ZAP STAND UPGRADE KIT
ASSEMBLING | ZAP STAND OR ZAP STAND UPGRADE KIT (1/3)
If you have a ZAP camera head already mounted on a flexarm,
start by disassembling it by following the ZAP FLEX and ZAP
INLINE manual.
Then, assemble the base and rod with four M5x16 countersunk
screws (bag 1) and place the assembled stand on a sturdy table.
Attach the camera mount to the rod with the three M4x12 screws
(bag 1).
OPTION 1: WITH EXTENDED CAMERA ARM
Mount the extension block on the camera head by using the four
M4x60 screws (bag 2).
Mount the extension cylinder to the extension block with the two
M4x10 screws (bag 2).
