9
Operation
/Figure 1/
4. You can now listen to the playback from the computer
and the amplifier.
5. You can also control playback settings through the
USB BRAVO-HD Audio Device Control Panel.
•
Start “BRAVO-HD Audio CPL” from the desktop or
program menu. The BRAVOHD Control Panel will
appear (Figure 2).
•
If the amplifier is switched on and connected to the
computer the panel will display:
○ The current default format (sample and bit rate)
as selected in the Windows
®
system. This change
will affect a default format of your audio device in the
Windows
®
system.
○ The current setting of playback via ASIO
(preferred bit rate and buffer size).
Click to change.
○ In the playback mode the current format (PCM).
Note!
•
The bit rate setting should be the same as or higher
than the playback file. Otherwise the bit rate or output
is lower than the original.
•
Setting the smaller buffer size for a higher resolution
music file may cause noises or interruption. Set the
buffer size to bigger and restart the playback.
/Figure 2/
