12
Specifications
Power Output
2 x 500mW @ 100 Ohm load
DAC Resolution
Asynchronous 24bit / 192kHz
Vacuum Tubes
1 x 12AX7
THD
Less or equal 0.1% @ 100 Ohm (1kHz, 300mW)
Signal/Noise ratio
88dB
Input Sensitivity
750mV
Inputs
RCA stereo AUX, USB (for computer)
Outputs
RCA Pre-Out
Headphone Impedance
30 to 300 Ohm (1/4”)
AC Power, Power Consumption
220V-240V 50/60Hz, 10W
Dimensions (H x W x D)
12 x 17 x 23.5 cm
Weight (net)
2.5 kg / pc
We reserve the right to change the technical data and the design of the product without notice as a result of further development.
We strongly advise to contact a professional installer or dealer in order to install
TAGA Harmony products.
We recommend using high quality TAGA Harmony cables and other installation
accessories.
Kit Content:
Amplifier
1EA
Power Cable
1EA
A-to-B USB 2.0 Digital Cable
1EA
Instruction Manual
1EA
www.TagaHarmony.com
TAGA EUROPE
POLPAK POLAND Sp. z o.o.
AL.JEROZOLIMSKIE 333A
05-816 REGUŁY k/WARSZAWY, POLAND
Email: [email protected]
IMPORTANT!
Your product is marked with the symbol as showed on the left.
For EU (European Union) member users:
According to the WEEE (Waste electrical and electronic equipment)
Directive, do not dispose of this product as household waste or commercial waste.
Waste electrical and electronic equipement should be appropriately collected and
recycled as required by practices established for your country.
For information on recycling of this product, please contact your local authorities, your
household waste disposal service or the shop where you purchased the product.
Your product is marked with the symbol as showed on the left.
For EU (European Union) member users:
This product has been tested and found in compliance with
requirements of the European Community
2014/30/EU (EMC) & 2014/35/EU (LVD) directives.
