STEP 6
Remove Cable (51) from Selector Shaft (30). Remove 2 Pan Head Allen Bolt M10x25 (59), 2 Spring
Washer (71) and 2 Flat Washer (73) from Guide-rod (15). Incline Guide-rod (15) as shown in the drawing and then
remove the combination of Top Weight Stack (29) and Selector Shaft (30). Make sure the shock absorber rubber
and the weight lift are in the right position as shown in the drawing.
Then put 15 Weight Stack (31) to Guide-rod (15), insert back the combination of Top Weight Stack (29)
and Selector Shaft (30). Assemble Guide-rod (15) to Tower Frame (1) using 2 Flat Washer(73), 2 Spring Washer
(71) and 2 Pan Head Allen Bolt M10x25 (59). Connect Cable (51) to Selector Shaft (30) and using the right tools
tighten bolts and nuts properly.
Nº
English description
Qty
1
TOWER FRAME
1
12
WEIGHT SELECTOR PIN
1
15
GUIDE-ROD
2
29
TOP WEIGHT STACK
1
30
SELECTOR SHAFT
1
31
WEIGHT STACK
15
59
PAN HEAD, ALLEN BOLT M10*25
2
71
SPRING WASHER
2
73
FLAT WASHER
2
51
CABLE
1
