Nomade User’s Manual
9
HC-30 Charger for the microphone, HC-37 for the belt transmitter
Handheld microphones and beltpack transmitters can be reloaded.The charger HC-30 is for the
handheld microphone SQ-5016. The charger HC-37 is for handheld microphone SM-5016.Before
loading check that the batteries are rechargeable ones.
PIED SPS 4
Hand crank tripod stand is delivered with a bag. Height: 1,25-2,05 m / 49.2-80.7“.
Max load: 70 kg / 154 lbs.
TROLLEY C-50X
The trolley bag C-50X was espeacially developped for NOMADE.
It exists 2 possibilities to carry NOMADE:
First of all you can use the trolley bag like a modern suitcase. It has wheels so you can roll it behind
you. The plastic handle for it is situated on the top.
Secondly, you can use this trolley like a sport bag. You have 2 long handles; 1 on each side of the
bag.
The small handle located on the top of the trolley helps the customer to put up the bag. Never use
it to carry NOMADE!
H-50EXT
H-50EXT is an outdoor protective bag especially developped for NOMADE.
HC- 30
HC-37
2
1
Do not use this handle to
carry NOMADE.
Nomade User’s Manual
8
Belt transmitter settings
1. Making changes to CHANNEL / FREQUENCY
Use UP or DOWN button to go to the CHANNEL /FREQUENCY page. The
cursor will flash to allow changes to be made. Pressing UP or DOWN but-
ton will increase or decrease the channel number. The corresponding fre-
quency will change accordingly. When a desired channel(frequency) is being selected, repress Set
for 2 seconds to save and store the data in the memory.
2. Input Level Gain Control Adjustment
Low impedance (Lo-Z) " MT" & high impedance (Hi-Z) " GT" gain controls are situated inside
the transmitter. Gain controls are adjustment ports that enable you touse microphones of diffe-
ring output levels and Guitar or instruments with Hi-Z output. To adjust microphone (Lo-Z)
input levels, turn the "MT" control and to adjust the Guitar or instrument (Hi-Z) input, adjust the
"GT" gain control to set the transmitter's desired audio input level.
3. Making changes to Battery selection
Use UP or DOWN button to go to the Battery selection page. Press SET for
about 2 seconds to activate the cursor. Press UP or DOWN button to move
the cursor to either NiMH (rechargeable battery) or AKLN (Alkaline battery)
position.When the desired option has been selected, press SET for about 2 seconds to save and
store the data in the memory.
Battery Installation
SM-5016 uses 2 pieces of " AA " size batteries (Alkaline battery is
recommended ). To install or remove the batteries, press the
release buttons at the edges of the transmitter to open or close the
cover as illustrated below.
For rechargeable batteries we strongly recommend NiMH batteries, no alkanies.
Wrong batteries can damage the microphone functions. Check battery status. Many
batteries are known to have leakage problem of conductive and corrosive liquid.
Remove the batteries if you do not plan to use the belt transmitter for a few days.
Also check that transmitter and receiver are on the same channel.
L
L
CAUTION: BATTERY
Содержание Nomade
Страница 7: ...Nomade User s Manual 12 NOTES NOTES ...
