getting started
|
09
08
|
key features
• ‘Straight Line Technology’ links the analog inputs and digital to
analog converter outputs to the audio outputs
• TAGtronic Communications Bus for reprogramming, data exchange
and multi-room expansion
• Powerful 16-bit C161RI microcontroller for ease of use
• Round core transformer for minimised magnetic leakage
• Premium grade audio components for best sound quality
• Mixed technology construction to optimise the digital and analog
circuits - surface mount for digital circuitry, leaded for critical audio
circuits
• Multi-layer printed circuit board for improved signal to noise ratio
• Internal vibration damping and proprietary sorbothane sonic
isolation feet
• Important for the future: the operating software is stored in field-
programmable memory which can be updated by the user at home,
using a suitable PC and a TAGtronic Programming Cable
• High-quality construction for long life
We know you are keen to get your DPA32R
DAB
preamplifier working. This section will have you
enjoying your favourite music as quickly as possible, but to obtain the optimum performance
you should spend a few minutes studying these instructions. Contained within are a series of
easy-to follow steps which will have you up and running in the minimum of time
(1)
.
1. Throughout this manual
bold
print indicates the lettering that you will find on the panels of your DPA32R
DAB
and the remote control.
2. The power button is a latching switch. One press will hold it in; the next will release it.
The DPA32R
DAB
is designed
to run warm during normal
operation. Please ensure
that there is adequate
ventilation above and
below the unit. We recommend that you do
not place your DPA32R
DAB
above anything
that runs hot, such as a power amplifier.
You should also locate the unit so that the
front panel is in clear view; this will assist
in setting up and make the DPA32R
DAB
remote more responsive.
positioning
preparation
before you start
Make sure that
all components of
your system are
disconnected
from the AC
supply whenever
you change any
connections.
power connection
Check that the power button is out so that
the power is off when you plug in
(2)
. Using
the cable supplied, connect the socket on
the back of your DPA32R
DAB
to an AC
supply outlet. For the best sound quality we
recommend you do not use multi-plug
adaptors.
GRR00780.02-GB DPA32R v1.07.4 11/10/01 2:26 pm Page 08
