background image

Press the 

pause

button to interrupt the playing of the CD. 

PAUSE

appears on the display while playing is paused. This function
remembers which part of the CD was playing when you pressed
the button. Press 

pause

again, or press 

play

, to restart at exactly

the same place.

Press the 

stop

button to stop the CD playing. This function does

not remember which part of the CD was playing when you pressed
the button and clears any repeat settings (see page 16).

pause

stop

Your CDT20R can be operated by using the buttons on the front
panel or by using the remote control supplied

(1)

. The remote

control also operates selected TAG McLaren Audio integrated
amplifiers and preamplifiers.

Press the 

open/close

button to open the CD drawer. You can

now put a CD in the drawer (make sure its label is facing up).
Press the button again to close the drawer. The drawer will
close automatically after about three minutes.

A few seconds after the CD is loaded, the display will show the
table of contents, referred to as TOC, which consists of the total
number of tracks and total playing time of the CD. 

If the CD is not loaded correctly or is faulty, the word 

ERROR

will

be shown on the display for about three seconds, followed by the
word 

DISC

. If this happens, open the drawer and re-seat the CD.

Press the 

play

button to start the CD playing. The 

TRACK

number,

TIME

(2)

and the word 

PLAY

will appear on the display. Play will

start at the first track and go on to the end of the CD. If you 
press 

play

while a track is playing, the CDT20R will return to the

beginning of the track and start playing it again. If the drawer is
open, pressing 

play

will close it.

open drawer

cd recognition

play

12

13

playing cds

playing cds

1. Some buttons have special functions when pressed for more than two seconds

(see page 14 and 19). Unless you want to use these functions you should not
hold any button down for longer than two seconds

2. See page 18 for more information about the 

TIME

display

open/close

play

k

stop

pause

GRA00046.1-[CA]CDT20R   13/03/01  09:53  Page 13

Содержание CDT20R


















Отзывы: