TAG MCLAREN AUDIO CDT20R, Руководство пользователя

Страница: 11 / 17

Select the track that you want to be first in the program by using
the
track + or track – buttons
(1)
. Press the play button to store the
track. The STEP number increases by one.
Repeat this procedure for each track that you want to store.
The
TOTAL TIME
shows the approximate (2) cumulative time of the
program including the track you have currently selected.
If you want to repeat a track, you can store it more than once.
If you do this,
TRACK will flash to remind you that the track has
already been selected.
Once you have stored your program, you can play it by pressing
the
play button for at least two seconds.
20 21
programming programming
storing a
program
playing a
program
delayed play
exiting program
mode
erasing a
program
maximum
program length
play
hold for at least
two seconds
pause
hold for at least
two seconds
stop
hold for at least
two seconds
open/close
hold for at least
two seconds
track
- -- +
play
1. You can also select a track by using the remote control number buttons. You can
enter one or two digits. If you want to replace a two digit number by a single
digit you have to enter a leading zero. See page 15 for more information on the
use of the numeric keys for direct entry
2. The cumulative time shown on the CDT20R’s display is taken from the table of
contents information, and includes the pause between each track. Because the
pause can be any length (including zero), and may or may not be included in
the times stated by the CD manufacturer, the cumulative time can only be
approximate
1. The CDT20R will start playing almost instantly from pause as the CD is already
spinning. This is useful for cueing recordings
If you do not want to play your program as soon as you have
stored it, you can press the
pause button for at least two seconds.
When you are ready, to play your program, press either the play
or the pause button (1) .
Press the
stop
button for at least two seconds to exit program
mode. The word PROGRAM is no longer displayed. You can now
play your CD in the usual way. The program has not been erased
and you can return to it by pressing the
stop button for at least
two seconds to re-enter program mode.
Opening the CD drawer or turning off the power will erase the
stored program. If the CDT20R is still in program mode, press the
open/close button for at least two seconds to open the CD
drawer. This will also exit program mode.
Your program can include a maximum of 59 steps. If the total
program playing time exceeds 99 minutes and 59 seconds, the
time display will show
- -:- - . This has no effect on the playing of
your program.
GRA00046.1-[CA]CDT20R 13/03/01 09:54 Page 21