![TAG MCLAREN AUDIO Avantgarde 250x3R Скачать руководство пользователя страница 9](http://html.mh-extra.com/html/tag-mclaren-audio/avantgarde-250x3r/avantgarde-250x3r_owners-manual_813562009.webp)
Do not connect XLR and RCA at the same time to any given module as this will
cause severe distortion and can damage your equipment.
set-up
|
17
On the rear panel of the 250x3R you will find three pairs of
loudspeaker terminals. Each pair is connected to one of the three
power amplifier modules. The terminals are designed to accept high
quality
3
/
8
” (10 mm) spade connectors. Use only high quality ready
made cables with insulated spade connectors such as the TAG
McLaren Audio F3-10-SPK.
Ensure that the amplifier has been switched off and the mains plug
has been removed from the wall socket before connecting the red
(+) terminal of the loudspeaker to the red terminal on the rear panel
of the 250x3R. In turn connect the black (–) terminal of the
loudspeaker to the black terminal on the 250x3R.
When making the connection, ensure that the spade terminal is
correctly located and the loudspeaker terminal is fully tightened.
16
|
set-up
loudspeaker connection
av processor or preamplifier connection
You will require an av processor, such as the AV32R or a preamplifier, such as the DPA32R
to provide the signals to drive the 250x3R.
The 250x3R provides single ended line inputs (RCA) and balanced XLR connections for each
module. You can mix both connections, say RCA for module left and right, and XLR for
module centre.
Make sure the av processor/preamplifier and all connected source units, such
as a CD player are switched off and their mains plugs have been removed from
the wall sockets.
The contacts of the loudspeaker terminals of this amplifier (marked with the
lightning symbol) have hazardous live voltages present. If in any doubt, consult
a qualified electrician before making connection to these terminals.
power connection
Before making any connections ensure the amplifier is switched off
(1)
and the mains plug is removed from the rear panel power socket
1. The power button is a latching switch. One press will hold it in; the next will release it
Do not leave an un-terminated cable attached to an unused input. This is likely
to degrade the noise performance of the system.
GRR00723.09-UK 250x3R.qxd 31/10/01 3:40 pm Page 16