TAG MCLAREN AUDIO Avantgarde 250x3R, Руководство пользователя

Страница: 12 / 16

22
|
heading remote control
|
23 22
|
remote control
extended operation
standby
The 250x3R is provided with a ‘standby’
mode. This function will switch off the
power supplies of the amplifier module.
The control section of the 250x3R remains
active to monitor the status of the 250x3R
and to wait for a ‘wake-up’ command from
the remote control.
Pressing the standby amp key on the
remote control will ‘wake-up’ the 250x3R.
The 250x3R runs through the start up
procedure which takes a few seconds
before the unit is finally un-muted.
For those channels of the 250x3R which
are switched to standby mode the
individual channel LED will be
extinguished. Only the active channel LEDs
are illuminated.
amp - dvd - av
The remote control also allows you to
switch the 250x3R amplifier (amp), the dvd
player DVD32R (dvd)
(1) and the av
processor AV32R (av) in and out of
standby.
The 250x3R remote control allows the convenient control of the major functions of the TAG
McLaren Audio av processor AV32R and the dvd player DVD32R.
all
Pressing the button labelled ‘
all
’ (1) will
switch all three products in and out of
standby mode.
channel standby
The 250x3R allows for switching individual
channels into power saving standby mode.
To provide this function certain buttons
need to be operated in combination. When
pressed, the button marked
channel - amp
will, after a time delay of one second,
switch all three channels in and out of
standby as described above. Alternatively
if you press the button
channel - amp
followed (within 1 second) by 1 , 2 , or 3
then only that channel will toggle in and
out of standby.
To allow the user to switch several modules
together in or out of standby press
channel
- amp immediately followed by any
sequential combination of numbers.
AV32R
Two major functions of the
AV32R can be controlled:
volume
Pressing the ‘ + ’ and ‘ – ’
buttons adjacent to the
‘
volume ’ label will increase
or decrease the volume of
the sound.
av input
By using either the ‘ + ’ or ‘ – ’
buttons adjacent to the label
‘
AV input ’ the AV32R will
step through all available
audio and video inputs in
sequence.
1. if connected to the AV32R and linked via the TAGtronic Bus, for details see the AV32R user manual
DVD32R
Two buttons, directly below the
label ‘
DVD
’, allow the user to
control the most frequently
used functions of the TAG
McLaren Audio dvd player
DVD32R.
play/pause
The DVD32R will play the disk,
and any subsequent presses
will bring the DVD player in
and out of pause.
stop
The replay of a disc will be
stopped.
Battery disposal: Please consider the environmental aspects of battery disposal.
Some battery types are considered as hazardous waste. Please consult your
local authority for further information and advice.
GRR00723.09-UK 250x3R.qxd 31/10/01 3:40 pm Page 22