TAG
Heuer
Timing
Page 4 / 8
3.8. BATTERY
To check the state of the battery.
For Transmitter :
4 Led + 2 Beep : > 75 %
3 Led + 2 Beep: > 50-75 %
2 Led + 3 Beep : > 25-50 %
1 Led + 3 Beep : < 25 %
warning case / change the battery
.
For receiver :
4 Led : > 75 %
3 Led : > 50-75 %
2 Led : > 25-50 %
1 Led : < 25 %
warning case / charge the battery
The state of the battery is also available when switching ON
4. Receiver charge
The receiver works with a LiPol battery of 3.7V / 2200mAh
Use our 12V power supply (HL540-1) with 500mA minimum.
The LED Power show the charge state
Receiver OFF
:
Charge active :
Slow flashing LED
Charge Finished:
Led OFF
Receiver ON
:
Charge active :
Fast flashing LED
Charge Finished:
Led ON
The full charge could take up to 4 hours.
The autonomy is up to 48h (with impulses every 10 secs = 6900 impulses)
The receiver is automatic switching in Stand-by if any impulses is detected during 24h.
Warning
:
It is forbidden to charge the battery with a temperature lower that 0°C and higher that 40°C
