background image

 

4

2.   DESCRIPTION OF THE SYSTEM   

 
 

 

Low power impulses transmission system (10 Mw) which doesn’t need any license (free of 
use) in Europe (ISM Band – 433.56 MHz). 

 

 

Each 

receiver

 can receive impulses (simultaneously or not) from 4 

transmitters 

identified by 

the function "CHANNEL" (1 to 4). 

  

 

Up to 4 teams can work (train) in the same area without disturbing each others thanks to the 
function "TEAM" which offers the possibility to code each system (A, B, C, D). 

 

It is also possible to use up to16 

transmitters

 with 4 

receivers.

 

 

 

The 

transmitter 

is equipped with a lithium battery insuring an autonomy of approximately 3 

years. There is no switch ON / OFF. 

 

 

The 

receiver

 is equipped with an internal accumulator insuring an autonomy of at least 24 

hours at 20 °C. Approximately 10 hours of charging may be necessary to obtain the maximum 
capacity. 

 

 

When the 

receiver

 is switched on, it is possible that one or more green LED’s are on before 

that the 

transmitter(s)

 start to transmit. This system of detection allows to visualize the quality 

of the received signal, but also the possible interferences coming from other radio 
transmission systems. If it is not possible to stop these interferences by moving the 

receiver

the transmission of impulses cannot be guaranteed. 

 
   

THE INSTALLATION INCLUDES:  

 

 

1 Plastic case which can contains up to 4 

transmitters 

 

 

1 to 4 

transmitters

 

 

Receiver 

 

 

2 to 5 antennas and 1 adapter right angle BNC 

 

1 Charger 100-240 VAC / 9VDC 

 

1 User manual  

 
Remark:  If the SET that you received contains an antenna longer than the others, it is intended for 

the 

receiver

.  

 
 
 
 
 
 
 
 
 
 

Содержание HL 610









Отзывы: