Tadpole VIPER, Руководство пользователя

Страница: 152 / 210

System identification
The Solaris installation now prompts you to provide the
following information that you determined in step1 of the
SPARC Platform Edition Start Here guide before
installing:
• Your system hostname
• Your IP address
• Your subnet mask
You can change your hostname and IP address later if you
want, using VIPER software.
Since you are installing your VIPER as a networked but
standalone system, you will rely on your own local sys-
tem files for password and host information.
1. When prompted, enter a hostname for your system and click
Next.
2. Enter an IP address for your system. This example uses the
address
192.9.200.1
NOTE:
If you will always be using your VIPER on the same
network and already have a specific IP address, you can type
it here. But usually it is preferable to enter the “temporary” IP
address shown above. This will restore the notebook to its
preset factory defaults for network connectivity, which pro-
vide greater flexibility for most users.
Installing Solaris
System identification
126 VIPER Product Family User’s Guide